SWR 5168 - Release Notification (General Release)

Attached are the software files for use with an ML2i / ML3 controller on a Recip compressor units.
This is an ML3 release only. updated configuration file embedded in the software revision.

There are two different xxx.m2x menu files.

If you are using a 4 MB SRAM card use the xxx.M2x.4096 file.
If you are using a 2 MB SRAM card use the xxx.M2x.2048 file.
The card image MUST be installed to the card using “PC Card Manager” application

Operational changes

Designations have been placed in front of the release notes as to controller type, ML3, ML2i. If a RecipScroll designation is in front of the release note then this indicates that the action was also included in both releases.


1. Configuration File Revision : Updated software to include the configuration database cf200331.cf3
2. No unit operational Software changes.

Tabela de atualizações

Controller Types	Part Number	Card Type	Software
ML2i	12-00397-01/XXXX	Flash	📱 recp5159.hex
ML3	12-00594-XX	PCMCIA SRAM	📱 recp5168.ml3 or 📱 menu0116.ml3
Use (ML2i.m2x) with a PC card  Adapter Tool (pn 76-50141-00)  when programming an ML2i  controller using a PCMCIA Card The menu program m2x.4096 is  required for use with the 4 MB  card (pn 12-50149-06) image  must be copied to the 4MB  SRAM card using “PC Card Manager” application	12-00594-XX or 12-50149-05 (with battery) New: 12-50149-06 (4MB) with battery	PCMCIA SRAM	📱  recp5159.m2x 📱 menu0116.m2x.2048 or 📱 menu0116.m2x.4096

Compartilhe suas descobertas conosco via e-mail ou WhatsApp.